Wheel bearing and engine accessory grease

Microgel thickened, mineral oil base
Combines high load-carrying ability with excellent resistance to water and high temperatures. It inhibited against corrosion and oxidation, and has a useful temperature range of -23°C to + 177°C. Used primarily in aircraft wheel bearings and engine accessories operating at high speeds and relatively high temperatures.

Microgel thickened, mineral oil base
Inhibited against corrosion and oxidation, it features outstanding low temperature torque properties and resistance to water. Useful temperature range of -40°C to +121°C. Used primarily in plain and anti-friction bearings on general aviation aircraft.

Microgel thickened, synthetic diester oil base
Corrosion inhibited and fortified to resist oxidation, it combines excellent load-carrying capacity with a useful temperature range of -73°C to + 149°C. Recommended for highly loaded gears and actuator screw mechanisms, as well as for instrument and general airframe lubrication.

Calcium soap thickened, mineral oil base
Inhibited against corrosion and oxidation, it is compounded with special anti-rust additives, and gives outstanding protection against fretting and moisture corrosion. Useful temperature range is -54°C to +93°C. Approved by all leading helicopter manufacturers. Recommended for most helicopter main and tail rotor bearings; widely used as a general purpose helicopter grease

Microgel thickened, synthetic hydrocarbon oil base
Corrosion inhibited and fortified against oxidation, it has excellent anti-wear properties, load-carrying capacity and water resistance, plus a wide useful temperature range of -65°C to +240°C. Recommended for aircraft wheel bearings, engine accessories and airframe lubrication, and for anti-friction bearings operating at high speeds and at high or low temperatures.

Lithium complex thickened, synthetic hydrocarbon/ester oil base
Developed with the purpose of satisfying almost all airframe lubrication requirements with a single grease. Its enhanced corrosion resistance and load-carrying capacity reduces wear and tear and can lead to extension of re-greasing intervals and reduction in maintenance costs. Replacing several greases with a single grease avoids the risk of misapplication and also reduces stock inventory, again providing cost savings. Useful temperature range is -73°C to +121°C.